Used  Welding Machinery Monthly Sales Products Special Sales Contact Us Site Map


Gear Tilt Rotator Positioners


Used Rotary Positioners for Weld Fabricating of Pipe.
Large or Small Weld Used Tilt Turn Rotators

Rent To Own Positioners


Pipe PositioningAll Purpose Weld PositionerSmall Pipe Welding Positioner


Pandjiris 7.5-4FB 750 lb. Positioner  750 lb. capacity at 4" center of gravity 135° manual tilt Variable speed rotation from .08 to 1.60 RPM Table height 30” 18" round table with slots 25' pendant control Variable speed foot pedal 115 volt Shipping weight 400 lbs. Serial # 81-2393

Pandjiris Model 10-4 1,000 lb. Positioner  without chuck 1,000 lb. capacity at 4" center of gravity power tilt with chuck Variable speed rotation from .040 to 2.0 RPM Manual adjustable table height from 33 1/2" to 43 1/2" in 5" increments with 7” riser 24" round solid table Includes 16” self-centering scroll chuck Pendant control On/off foot pedal 480/115 volt Shipping weight 1,500 lbs. Serial #W599-4

Ransome SW-10A 1,000 lb. Twin Axis Positioner  1,000 lb. capacity at 6" center of gravity 360° constant speed powered side arm tilt Variable speed rotation from .06 to 2.0 RPM 36" diameter table with slots On/off foot pedal 115 volt Serial #9321389  

Aronson Model HS10BBH/T30-3 Skyhook Positioner 2,500 lb. load capacity Center of gravity 28" Overhang 3' Off-center 22" table with a 9" diameter thru hole "Skyhook" positioners provide part rotation in two 360° axis which result in partial or full inverting of the work piece 10' pendant control 460 volt Serial #n/a Shipping dimensions: 7' long x 5' wide x 5' high Shipping weight: 4,750 lbs. Reconditioned:

Ransome Model 25P 2,500 lb. Positioner  2,500 lb. capacity at 6” center of gravity 135° power tilt Variable speed rotation from .03 to 1.55 RPM Manual adjustable elevation from 35.25” to 53.25” in 6" increments 32" round table with slots and a 2" diameter through hole 25' pendant control for all functions 115 volt Shipping weight 2,500 lbs. Shipping dimensions: 6' long x 4' wide x 5" high Serial #1616294

Aronson Model HD-25CS 2,500 lb. Positioner  2,500 lb. capacity at 6” center of gravity 135° power tilt Variable speed rotation from .07 to 2.0 RPM Manual adjustable elevation from 34.5” to 56.5” in 5.5" increments 42" round table with slots Pendant control for all functions 460 volt Shipping weight 1,500 lbs. Shipping dimensions: 5' long x 4.5' wide x 48" high Serial #801501

Aronson Model HD-25 2,500 lb. Positioner  2,500 lb. capacity at 6” center of gravity 135° power tilt Variable speed rotation from .07 to 2.0 RPM Manual adjustable elevation from 36” to 58” in 5.5" increments 30" x 30" square table with slots Pendant control for all functions 460 volt Shipping weight 1,500 lbs. Shipping dimensions: 5' long x 4.5' wide x 36" high Serial #741188

Aronson HD-25 2,500 lb. Positioner w/foot pedal 2,500 lb. capacity at 6” center of gravity with chuck 135 ° power tilt Variable speed 30” square table Manual table adjustable from 36 ½” to 58 ½” in 5 ½” increments 15’ pendant control 20’ forward/stop/reverse foot control 18 inch self-centering chuck with adapter plate – 3 grippers and 3 T-slots 230 volt - 3 phase Shipping dimensions 6’L x 4’W x 4’ H Shipping weight 2,000 lbs. Serial #67908  

Worthington/Ransome Model 25P 2,500 lb. Positioner Constant Speed 2,500 lb. capacity at 6” center of gravity  Variable speed 135° power tilt Variable speed rotation from .038 to 1.55 RPM Adjustable table height from 41” to 59” in 6” increments 32” x 32” square slotted table Pendant control 460 volt Shipping weight 2,100 lbs. Serial #56669  

Ransome Model 25P 2,500 lb. Positioner  2,500 lb. capacity at 6” center of gravity 135° power tilt Variable speed rotation from .038 to 1.55 RPM 43” fixed table height 60” diameter round table Pendant control 230 or 460 volt Shipping weight 2,100 lbs. Serial #49398

Reed/Webb Model P25R 2,500 lb. Positioner  2,500 lb. capacity at 6” center of gravity Power tilt Variable speed rotation from .07 to 2.0 RPM Fixed table height at 34.5” 30” round table with slots Pendant control for all functions 230 or 460 volt Shipping weight 1,500 lbs. Serial # 511788

P & H Model WP-2 2,500 lb. Positioner  2,500 lb. capacity at 6” center of gravity Manual/hydraulic tilt Variable speed rotation Manual adjustable height from 24” to 40” in 6” increments Pendant control 230/460 volt Serial #WP-2447

Sciaky WP-1AB 2,500lb Positioner  2,500 lb. capacity at 12” center of gravity 135° power tilt Variable speed euro drive rotation Manual adjustable height from 35” to 51” 40” round solid table with T-slots and 9“through hole 230 volt - 3 Phase Serial #7481

Sciaky WP-1AB 2,500 lb. Positioner  2,500 lb. capacity at 12” center of gravity 135° power tilt Variable speed rotation - no back lash Manual adjustable height from 35” to 51” 40” round 1 1/2" thick solid table with T-slots and 9“through hole 230 volt - 3 phase Serial #N/A

Koike-Aronson HS10BBH/T3-30 "Skyhook" Positioner  2,500 lb. load capacity Center of gravity 28" Overhang 3" Off-center 38" table "Skyhook" positioners provide part rotation in two 360° axis which result in partial or full inverting of the work piece Pendant control Serial #80308

P510010 Koike-Aronson HS10BBH/T3-30 "Skyhook" Positioner 2,500 lb. load capacity Center of gravity 28" Overhang 3" Off-center 38" table "Skyhook" positioners provide part rotation in two 360° axis which result in partial or full inverting of the work piece Pendant control Serial #N/A

Ardmore Electro-Hydraulic Tilting Positioner  4,000 lb. capacity at 12” from the table 360° hydraulic rotation Hydraulic lift and tilt 16” diameter work table Serial #N/A Shipping weight 4,750 lbs. Hydraulic/460 volt  

Arborfer Model PAF0010PHS Hydraulic 4,000 lb. Positioner  4,000 lb. capacity at 12” center of gravity  converted to 480 volt 90° constant speed power tilt Variable speed rotation adjusted by hydraulic pressure 60” round slotted table Fixed table height at 49” 575 volt Shipping weight 4,100 lbs. Serial # 1001011089 

Aronson Model HS30GE/T4-62 Sky Hook Positioner  4,000 lb. capacity at 36” center of gravity off of the turntable face 62” clearance from center of turntable "Skyhook" positioners provide part rotation in two 360° axis which result in partial or full inverting of the work piece Pendant control Serial #7914

Preston-Eastin Model PA-45-12, 4,500 lb. Positioner  4,500 lb. capacity at 12” center of gravity 135° power tilt Variable speed rotation from .04 to 1.18 RPM Manual adjustable elevation from 37” to 62” IN 5" increments 42" x 42" Square table with slots Pendant control for all functions 460 volt Shipping weight 3,500 lbs. Shipping dimensions: 75" long x 48" wide x 37" high Serial #5118

Aronson GE-45 Geared Elevation Positioner  4,500 lb. capacity at 12” center of gravity 135° power tilt .01 to 1.2 variable speed rotation Powered elevation from 53” to 86” 42” square table with slots Pendant control Shipping weight 5,700 lbs. Serial #N/A

Aronson GE-45B Geared Elevation Positioner  4,500 lb. capacity at 12” center of gravity 135° power tilt. .02 to 1.2 variable speed rotation Powered elevation from 54” to 87” 48” round table with slots 9” thru hole Pendant control Shipping weight 5,700 lbs. Serial # 6920  

Ransome Model 14 6,000 lb. Positioner  6,000 lb. at 12” center of gravity 135° power tilt Constant speed rotation 45” x 45” square table with slots Fixed table height of 52 inches 20’ pendant control 230 volt – 3 phase Serial number #5120 Shipping dimensions: 8’L x 68”W x 52”H Shipping weight: 7,500 lbs.

Ransome Model 14 6,000 lb. Positioner 6,000 lb. at 12” center of gravity 135° power tilt Constant speed rotation 45” x 45” square table with slots Fixed table height of 52 inches 20’ pendant control 460 volt – 3 phase Serial number #5484 Shipping dimensions: 8’L x 68”W x 52”H Shipping weight: 7,500 lbs.

Cullen-Freistedt Model 60 6,000 lb. Positioner  6,000 lb. capacity at 12” center of gravity 135° power tilt Constant speed rotation Manual adjustable table height from 62” to 74” with the table flat 40” x 40” square 7/8” thick table Pendant control 460 volt Serial #732

Aronson GE-60A Geared Elevation Positioner  6,000 lb. capacity at 12” center of gravity 135° power tilt .05 to 1.5 variable speed rotation Powered elevation from 60” to 93” 48” round table with slots Pendant control Shipping weight 7,300 lbs. Serial #7935 

Aronson 180T120/CC 180 ° Tilter  7,000 lb. weight capacity at 12” center of gravity from table Table tilts 180° from vertical to vertical For positioning long work pieces such as long truck frames for down hand welding Table does NOT rotate Table is a dual screw clamping table with an internal capacity of 40” wide x 27.5” high Serial #N/A

Teledyne-Readco Model UHSE-400 7,500 lb. Side Arm Positioner Side arm positioners are also known as Skyhook positioners 7,500 lb. capacity at 6” center of gravity Dual screw driven powered elevation from 31.5” to 77.5” w/side arm table flat and parallel to the floor 51” to the center of the rotational axis with the side arm at 90° to the floor Side arm table is 3.5” off set to the center of the rotational axis on the headstock Variable speed rotation of the side arm table 88” maximum part diameter capacity Pendant control for all functions 460 volt Serial #106130

Teledyne-Readco Model UHSE-400 7,500 lb. Side Arm Positioner Side arm positioners are also known as Skyhook positioners 7,500 lb. capacity at 6” center of gravity Dual screw driven powered elevation from 31.5” to 77.5” w/side arm table flat and parallel to the floor 51” to the center of the rotational axis with the side arm at 90° to the floor Side arm table is 3.5” off set to the center of the rotational axis on the headstock Variable speed rotation of the side arm table 88” maximum part diameter capacity Pendant control for all functions 460 volt Serial #106133

Pandjiris Model DC-150-VPL “Drop-Center” Positioner Rotation capacity of 12,000 lbs. at 12” Center of gravity off of the centerline of rotation Constant speed powered elevation Center section has two adjustments from 28” to 118” Inside distance between upright sides is 19’ 360° rotation at 0.0-2.0 RPM 200° tilt at 0.0-1.75 RPM Table is 42” Round with slots Serial #60-4566-1 Note; “Drop Center positioners” are typically used for work pieces with longer center of gravity distances from the table, resulting in lower working or welding heights than using higher capacity positioners.

Cullen Friestadt Model 140 14,000 lb. Positioner 14,000 lb. at 12” center of gravity or 12,000 lb. at 18” center of gravity 135° power tilt Constant speed rotation 54” x 54” square table, no slots Manual adjustable table height from 70” to 87 1/4" 20’ pendant control 230 volt – 3 phase Serial number #3873 Shipping dimensions: 90”L x 66”W x 61”H Shipping weight: 7,800 lbs.

Gabco 16,000 lb. Hydraulic Beam Positioner 16,000 lb. capacity at 48” off faceplate 100” maximum diameter with table vertical Constant speed at .5 RPM 25 degree tilt up and 20 degree tilt down Hydraulic lever and push button controls 12” x 80” load beam with multiple adjustment holes for fixturing 460 volt – 3 phase hydraulic Serial #561 Shipping weight 10,000 lbs.

P&H Model WP-12 16,800 lb. Positioner Working 16,800 lb. capacity at 12” center of gravity  Reconditioned 135° power tilt Mechanical variable speed rotation from .006 to .6 RPM Powered elevation from 78” to 119” with table horizontal 7' x 7' slotted square table Pendant controls for tilt and elevation Pendant and foot pedal for rotation control 460 volt – 3 phase Shipping weight 14,000 lbs. Serial #1150

Ransome Model 200P 20,000 lb. Positioner 20,000 lb. capacity at 12” center of gravity 90° power tilt Variable speed rotation from .025 to 1.0 RPM 54” x 54” square table with slots Fixed table height of 51” Pendant control for all functions Serial #N/A

Cullen-Freistedt Model 200 20,000 lb. Positioner 20,000 lb. capacity at 20” center of gravity 135° power tilt Variable speed rotation from .025 to 1.0 RPM 48” round table Fixed table height of 52” Pendant control for all functions Serial #153

Aronson model G-600, 40,000 lb. Positioner 40,000 lb. capacity at 12" center of gravity 90° power tilt Variable speed rotation from .007 to .4 rpm 12' diameter round table 35' pendant control 460 volt Serial #647 Shipping dimensions: 12' long x 12' wide x 89" high Shipping weight: 23,000 lbs.

Ransome Model 400P 40,000 lb. Positioner As-Is 40,000 lb. capacity at 12” center of gravity 135° power tilt Variable speed rotation from .025 to 1.0 RPM Variable speed tilt 72” diameter round table with slots Adjustable table height of 106” to 118” in 6” increments Currently mounted atop 13 1/2” I-beam risers Pendant control for all functions Also includes fixturing for mounting round tank heads 460 volt 3phase Shipping weight 35,000 lbs. Serial #24-2400

Worthington Model 400 40,000 lb. Positioner 40,000 lb. capacity at 12” center of gravity 135° power tilt Variable speed rotation from .2 to 3.0 RPM Powered elevation with 48 inches of travel 7’ x 7’ square table with slots Pendant control for all functions 230 volt 3 phase Shipping weight 35,000 lbs. Serial #2867379  

Aronson Model G-400A 40,000 lb. Positioner 40,000 lb. capacity at 12” center of gravity Variable speed rotation from .016 to .50 RPM Rotation torque 480,000 lb./inch 90° of tilt forward and 45° of tilt backward 7’ x 7' square table with T-slots and 12” thru hole spindle Fixed table height at 91” from the floor with 10” riser Remote pendant control for all functions 480 volt 3 Phase Serial # 7517 Shipping weight 16,300 lbs.

Aronson Model HD-500 50,000 lb. Positioner 50,000 lb. capacity at 12” center of gravity 135° power tilt Four speed rotation with manual transmission Fixed height at 72” 96” x 96” square table with slots and 12” thru hole Pendant control for all functions 460 volt Shipping weight 22,500 lbs. Serial# 647 Rental Available on this Unit!!

Aronson Model HD-600 60,000 lb. Positioner  60,000 lb. capacity at 12” center of gravity 135° power tilt Variable speed rotation from .006 to .6 RPM Fixed elevation at 142” 8’ round table with slots and 12” thru hole Pendant control for all functions 460 volt Shipping weight 46,000 lbs. Serial# 693

Aronson Model HD-600 60,000 lb. Positioner 60,000 lb. capacity at 12” center of gravity 135° power tilt Variable speed rotation from .006 to .6 RPM Adjustable height from 74” to 122” in 12” increments 96” x 96” square table with slots and 12” thru hole Pendant control for all functions 460 volt Shipping weight 18,800 lbs. Serial #7813

Brantford Tool Model LP 60T 120,000 lb. Hydraulic Positioner 120,000 lb. capacity at 12” center of gravity 90° hydraulic powered tilt Variable speed rotation from .006 to .6 RPM 113” round table with (6) T-slots 74” table height horizontal 123” to the center of table vertical 8’ 6” maximum diameter in vertical position Pendant control for all functions 575 volt Shipping weight 48,500 lbs. Serial #3671


January | February | March | April | May | June | July
August
| September | October | November | December


513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585

sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com 
with questions or comments about this web site.
Site Map
Copyright © 1996-2017 Weld Plus Inc.
Last modified: January 4, 2017